All factory default values are shown in bold.
ETHER-
TCP/IP ENABLE
NET
Configuration Menu Overview
Settings
If
YES
If
NO
IPV4
DHCP/
BOOTP
IPV4
ADDRESS
DEFAULT
ROUTER
SUBNET
MASK
YES/NO
is selected, TCP/IP is enabled.
is selected, TCP/IP is disabled.
Settings
Select whether or not the IP
address is automatically
acquired.
If
is selected, the IP address
YES
is automatically acquired.
If
is selected, the IP address
NO
is not automatically acquired.
Settings
Set the IPv4 address for this
printer on the network.
Use the +, ,, *, and ) keys to
specify the value.
If the IP address is manually
specified,
DHCP/BOOTP
automatically set to
Settings
Specify the IPv4 address of the
router if one is on the network.
Use the +, ,, *, and ) keys to
specify the value.
Settings
Specify the subnet mask for the
network.
Use the +, ,, *, and ) keys to
specify the value.
YES/NO
192.168.001.002
is
.
NO
000.000.000.000
000.000.000.000
4-19