Programming; General - Kyocera ECOSYS FS-1320D User Manual

3 Programming

3.1 General

Kyocera Mita printers and multifunction devices are equipped as standard with a
number of linear barcodes which can be controlled exclusively using the Kyocera
language PRESCRIBE.
The PCL Barcode Flash software extends the number of barcodes supported to
include important new types, which have been established in trade, industry and
postal operations. In addition, an important feature is that almost all existing and new
barcodes can also be controlled by means of PCL standard commands, which
considerably enhances the field of application of printers equipped appropriately.
The following section describes control via PCL commands in detail and includes a
number of examples of applications and prints.
Control by means of commands is already described precisely in the Kyocera Mita
manual "PRESCRIBE II
is available in both German and English versions (PDF format) on the CD supplied
with the product. Therefore, this manual deals only with special features of
PRESCRIBE programming where new barcodes have been added.
A description of PDF417 code control can also be found on the CD. In the version of
PCL Barcode Flash on which this manual is based, control of PDF417 is possible
only via the PRESCRIBE command XBAR.
P M
E ROGRAMMING ANUAL
24
" (C 4: B
HAPTER ARCODES
), and this