Activating Fonts Using A Prescribe Command - Kyocera ECOSYS FS-1320D User Manual

3.7.2 Activating fonts using a PRESCRIBE command

Either using the individual FONT command or the pair of commands, CSET and FSET
(CSET and FSET should always be used together as otherwise the font activation
cannot be correctly recognised by the printer).
The zero character is displayed as 0 and it should not be confused with the letter O!
Barcode 3 of 9; 8.1 cpi;
FONT 830; or CSET 0Y; FSET 0p8.1h12v0s0b0T;
Barcode 3 of 9; 4.6 cpi;
FONT 831; or CSET 0Y; FSET 0p4.6h12v0s0b0T;
EAN/UPC 10 Mil; proportional;
FONT 832; or CSET 8Y; FSET 1p12v0s0b0T;
EAN/UPC 13 Mil; proportional;
FONT 833; or CSET 8Y; FSET 1p12v0s3b0T;
Letter Gothic; 17 cpi;
FONT 834; or CSET 8U; FSET 0p16.66h9.5v0s0b0T;
Letter Gothic; 12 cpi;
FONT 835; or CSET 8U; FSET 0p12h12v0s0b0T;
Letter Gothic; 10 cpi;
FONT 836; or CSET 8U; FSET 0p10h14v0s0b0T;
Line Draw; 10 cpi;
FONT 837; or CSET 0B; FSET 0p10h12v0s0b0T;
OCR-A; 10 cpi;
FONT 838; or CSET 0O; FSET 0p10h12v0s0b104T;
OCR-B; 10 cpi;
FONT 839; or CSET 1O; FSET 0p10h12v0s0b110T;
USPS ZIP; proportional; 12 point:
FONT 840; or CSET 15Y; FSET 1p12v0s0b0T;
12 point:
12 point:
12 point:
12 point:
9.5 point:
12 point:
14 point:
12 point:
12 point:
12 point:
107