HP wp110 - 802.11b Wireless Print Server Configuration Manual page 15

4. Select Setup > Wireless to open the
Wireless Configurations screen.
5. Set the following options:
a. Choose Network: select the name
of the AirPort base station
b. Channel: no action needed
If WEP is used, select the WEP Req to
Enable (Shared Key). Then set the WEP
Key by entering either the Default Key
or a Passphrase for the base station.
Note See page 10 for instructions on
setting appropriate WEP values in the
AirPort Admin Utility.
If WEP is not used, select the
following options:
– WEP Req: Disable
– WEP Key: no action needed.
6. Click OK.
The notification message screen
appears.
7. Click OK.
The print server is set to the
networking mode.
8. Establish TCP/IP settings (OS X only).
11