Epson R200 - Stylus Photo Color Inkjet Printer Service Manual page 15

EPSON Stylus Photo R200/R210
Table 1-5. Check Points for Error Before the Initial Ink Charge, Error Before Ink Cartridge Replacement Cleaning and No Ink Cartridge Error
Occurrence Timing
Phenomenon Detail
Position of CR
The printer does not perform the Initial
At power-on
Ink Charge and the error is displayed on
At HP
LED and STM3.
The printer does not perform the Ink
Replacement Cleaning and the error is
displayed on LED and STM3.
At power-on
Anywhere
The printer does not perform any print
operation and the error is displayed on
LED and STM3.
Occurrence Timing
Phenomenon Detail
Position of CR
"Holder, Shaft, LD Roller" rotates to
At operation
feed paper, but "Hopper" does not
-
operate.
TROUBLESHOOTING
Faulty Part/
Part Name
1. Check if the Ink Cartridge is normal by installing it in
Ink Cartridge
another printer.
1. Check if the correct data has been written in the address
5B<H> of EEPROM on "Main Board".
Main Board
(We cannot check it with Adjustment Program of Sylus
Photo R200/R210.)
1. Check if the Ink Cartridge is normal by installing it in
another printer.
Ink Cartridge
1. Check if ink still remains in the Ink Cartridge.
Ink Cartridge 2. Check if the Ink Cartridge is normal by installing it in
another printer.
Table 1-6. Check Points for Paper Out Error to Each Phenomenon
Faulty Part/
Part Name
1. Check if "Hopper" works properly while feeding paper.
ASF Assy.
Unit Level Troubleshooting
Check Point
1. Replace the Ink Cartridge with a new one.
1. Write proper Market Setting in the
Adjustment Program.
1. Replace the Ink Cartridge with a new one.
1. Replace the Ink Cartridge with a new one.
2. Replace the Ink Cartridge with a new one.
Check Point
1. Reassemble "ASF Frame" and "Compression
Spring, 2.51" correctly.
Compression Spring, 2.51
Revision A
Remedy
Remedy
15