Belkin F5D8631-4 User Manual page 77

Manually Configuring Network Settings Manually Configuring Network Settings
Manually Configuring Network Settings in Windows 2000, NT, or XP
1.
Click "Start", "Settings", then "Control Panel".
2.
Double-click on the "Network and dial-up connections" icon
(Windows 2000) or the "Network" icon (Windows XP).
3.
Right-click on the "Local Area Connection" associated with your
network adapter and select "Properties" from the drop-down menu.
(1)
(2)
(3)
4.
In the "Local Area Connection Properties" window, click "Internet
Protocol (TCP/IP)" and click the "Properties" button. The following
screen will appear:
5.
If "Use the following IP address" (2) is selected, your Modem
Router will need to be set up for a static IP connection type. Write
the address information the table below. You will need to enter this
information into the Modem Router.
6.
If not already selected, select "Obtain an IP address automatically"
(1) and "Obtain DNS server address automatically" (3). Click "OK".
Your network settings are now configured for use with the Modem Router.
EN-75 EN-75