Belkin F5D8631-4 User Manual page 31

Alternate Setup Method Alternate Setup Method
Setting your ISP Connection Type to PPPoE or PPPoA
PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of
connecting networked devices. It requires a user name and password to
access the network of your ISP for connecting to the Internet. PPPoA (PPP
over ATM) is similar to PPPoE, but is mostly implemented in the UK. Select
PPPoE or PPPoA and click "Next". Then enter the information provided by
your ISP, and click "Apply Changes" to activate your settings.
1. User Name
2. Password
- Enter your password. (Assigned by your ISP).
3. Retype Password
4. VPI/VCI
- Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here. (Assigned by your ISP).
5. Encapsulation
your ISP) to specify how to handle multiple protocols at the ATM
transport layer.
VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation)
allows only one protocol running per virtual circuit with fewer
overheads.
LLC: PPPoA Logical Link Control allows multiple protocols running
over one virtual circuit (more overhead).
6. MTU
- Enter the MUT value for your ISP
- Enter the user name. (Assigned by your ISP).
- Confirm the password. (Assigned by your ISP).
- Select your encapsulation type (supplied by
EN-29 EN-29
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)