Table of Contents
Advertisement
Manually Configuring Network Settings
3.
Next to "Configure" (2), if "Manually" is selected, your Modem
Router will need to be set up for a static IP connection type.
Write the address information in the table below. You will need to
enter this information into the Modem Router.
4.
If not already set, at "Configure:", choose "Using DHCP Server".
This will tell the computer to obtain an IP address from the
Modem Router.
5.
Close the window. If you made any changes, the following
window will appear. Click "Save".
Restart the computer. When the computer restarts, your network
settings are now configured for use with the Modem Router.
EN-72
EN-72
1
2
3
4
5
6
7
8
9
10
Hide quick links:
Advertisement
Table of Contents
