Appendix C Error Messages - Antelope Isochrone Trinity Owner's Manual

Appendix C
Error Messages
Display says: CANNOt dA CHOSEN SOUГCE
Read: Cannot DA Chosen Source
Reason:
The Audio channel is set to DA, and SOURCE is set to either OVEN or VIDEO.
Solution 1
Continue in DA mode by changing SOURCE knob to a position corresponding to a valid rear panel input.
Solution 2
Leave DA mode, selecting an internal sample rate.
Display says: NO IПPUt
Read: No Input
Reason:
The Audio channel is set to DA, but there is no input on the chosen SOURCE.
Solution 1
Continue in DA mode by applying a valid rear panel input that corresponds to the front panel SOURCE
knob.
Solution 2
Continue in DA mode by changing SOURCE knob to a position where there is a valid rear panel input.
Solution 3
Leave DA mode, selecting a standard sample rate.
Display says: SOURCE OFF-ГAtE
Read : Source Off-Rate
Reason:
Input is a non-standard frequency that is not one of the recognized gearboxing frequencies
as in Appendix A on page 11
Solution 1
Continue with the off-rate input, and select SPLIT mode. The audio channel must also be in DA mode.
Solution 2
Change SOURCE knob to OVEN and run on internal clock.
, and is likely a varispeed input frequency.
12