Table of Contents
Advertisement
•
Username: admin
•
Password: atlantis
•
LAN IP Address: 192.168.1.254
•
Subnet Mask: 255.255.255.0
•
ISP setting in WAN side: PPPoA, VCMux, Routing, VPI=8, VCI=35
•
Firewall=Enabled , SPI=Disabled
•
DHCP Server enabled with IP pool from 192.168.1.100 to 192.168.1.199
If you ever forget the password to log in, you may press the RESET button
up to 6 seconds to restore the factory default settings.
IP address
Subnet Mask
DHCP Server
DHCP Server IP Pool
3.2 TCP/IP Configuration
PCs must have an Ethernet interface installed properly and be connected to the router
either directly or through an external repeater hub, and have TCP/IP installed and
configured to obtain an IP address through a DHCP server or a fixed IP address that
must be in the same subnet as the router. The default IP address of the router is
192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC must be in
the same subnet, and have an IP address in the range of 192.168.1.1 to
192.168.1.253). The best and easiest way is to configure the PC to get an IP address
automatically from the router using DHCP. If you encounter any problems accessing
the router's web interface it may also be advisable to uninstall any kind of software
firewall on your PCs, as they can cause problems accessing the 192.168.1.254 IP
address of the router. Users should make their own decisions on how to best protect
their network.
LAN Interface
192.168.1.254
255.255.255.0
Enabled
100 IP available (from
192.168.1.100 to
192.168.1.199)
Mode=Routing
Encapsulation=PPPoA
Multiplex=VC
VPI=8
VCI=35
19
WAN Interface
Advertisement
Table of Contents
