2.3 The Rear Ports
PORT
LINE (RJ11)
USB
LAN (RJ45)
RESET
POWER (jack)
POWER (On/Off)
Connect the supplied RJ-11 ("telephone") cable to this
port when connecting to the ADSL/telephone network.
User can connect to PC using an alternative USB cable
through this port.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to the
Ethernet port when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
After the device is powered on, press it to reset the device
or restore to factory default settings.
•
0-3 seconds: reset the device
•
6 seconds above: restore to factory default
settings (this is used when you cannot login to
the router, e.g. forgot the password)
Connect the supplied power adapter to this jack.
Power ON/OFF switch.
13
MEANING