Presetting For Mountig The "Universal Isofix" Child Restraint System - Alfa Romeo Brera Owner's Manual

PRESETTING FOR
MOUNTING THE
"UNIVERSAL ISOFIX"
CHILD RESTRAINT
SYSTEM
This car is preset for mounting the Uni-
versal Isofix child restraint system, a
new European standardised system for
carrying children safely. Fig. 11 shows
an example of child restraint system.
The Universal Isofix child's seat covers
weight group: 1.
Due to its different anchoring system,
the Universal Isofix child's seat shall be
anchored to the proper lower metal
brackets A-fig. 12, set on rear seat
back. The upper belt (provided with the
child's seat) shall be then secured to fas-
tener B-fig. 13 set on rear seat back-
rest at child's seat height .
It is possible to mount both the tradi-
tional restraint system and the "Uni-
versal Isofix" one. Remember that in
case of Universal Isofix child's seat, you
can only use all those seats approved
with the marking ECE R44/03 "Uni-
versal Isofix".
126
fig. 11
The Universal Isofix "Duo Plus" child
seat and the special "G 0/1" seat are
available from Lineaccessori Alfa Romeo.
For any further installation/use detail,
refer to the "Instructions Manual" that
must be provided by the child restraint
system Manufacturer.
fig. 12
A0F0241m
fig. 13
WARNING
Mount the child restraint
system only with the car
stationary. The Universal Isofix
child restraint system is proper-
ly anchored to the mounting
brackets when clicks are heard.
In any case, keep to the instal-
lation instructions that must be
provided by the child restraint
system Manufacturer.
A0F0174m
A0F0190m