This car is preset for mounting the Uni-
versal Isofix child restraint system, a
new European standardised system for
carrying children safely.
Fig. 11/a shows an example of child
restraint system. The Universal Isofix
child's seat covers weight group: 1.
Due to its different anchoring system,
the Universal Isofix child's seat shall be
anchored to the proper lower metal rings
A-fig.12, set between rear seat back
and cushion. The upper belt (provided
with the child's seat) shall be then se-
cured to fasteners B-fig.13 set behind
It is possible to mount at the same time
both the traditional restraint system and
the "Universal Isofix" one.
Remember that in case of Universal Isofix
child's seat, you can only use all those
seats approved with the marking ECE
R44/03 "Universal Isofix".
At Lineaccessori Alfa Romeo is available
the "Universal Isofix" "Duo Plus" child's
seat shown in.
For any further installation/use detail,
refer to the "Instructions Manual" that
must be provided by the child restraint
Mount the child restraint
system only with the car
stationary. The Isofix child re-
straint system is properly an-
chored to the mounting brackets
when clicks are heard. In any
case, keep to the installation in-
structions that must be provid-
ed by the child restraint system