Interior Plastic Parts; Steering Wheel/Gear Level Knob With Genuine Leather Covering - Alfa Romeo Brera Owner's Manual

Hide thumbs Also See for Brera:
Table of Contents

Advertisement

INTERIOR PLASTIC PARTS

Clean plastic parts with a cloth
mositened with water and non-abrasive
neutral detergent. To remove grease or
hard stains, use appropriate products de-
signed to preserve the appearance of
components.
IMPORTANT Never use spirit or pe-
troleum to clean the instrument panel
or other plastic parts.
234
WARNING
Never use flammable
products like oil ether
or rectified petrol for cleaning
car interiors. Electrostatic dis-
charges generated by rubbing
during cleaning operations
could cause fire.
WARNING
Do not keep aerosol
cans in the car: they
might explode. Aerosol cans
must never be exposed to a
temperature above 50°C. The
temperature inside the car ex-
posed to the sun may go well
beyond that figure.
STEERING WHEEL/GEAR
LEVER KNOB WITH
GENUINE LEATHER
COVERING
(for versions/markets,
where provided)
These components shall only be cleaned
with water and neutral soap. Never use
spirit or alcohol-based products.
Before using special products for clean-
ing interiors, read carefully label in-
structions and indications to make sure
they are free from spirit and/or alcohol-
based substances.
If when cleaning the windscreen with
special glass products, some drops fall
on the leather covering of the steering
wheel/gear lever knob remove them
immediately and then clean with wa-
ter and neutral soap.
IMPORTANT Take the utmost care
when engaging the steering lock to pre-
vent scratching the leather covering.

Advertisement

Table of Contents
loading

Table of Contents