Isofix Child Restraint System Setup - Alfa Romeo MiTo 2016 Owner's Handbook Manual

ISOFIX CHILD RESTRAINT
SYSTEM SETUP
73)
The vehicle is equipped with ISOFIX
anchorages, a new standard which makes
fitting a child restraint system quick,
simple and safe.
Traditional child restraint systems can be
fitted alongside Isofix child restraint
systems on different seats in the same
car.
As an example, fig. 54 shows an example
of a Universal Isofix child restraint
system for weight group 1.
IMPORTANT The central rear seat is not
approved for any type of Isofix child
restraint system.
54
INSTALLING A UNIVERSAL ISOFIX
CHILD RESTRAINT SYSTEM
74) 75) 76)
Proceed as follows:
attach the seat to the lower metal
rings provided 1 fig. 55, positioned
between the backrest and rear seat
cushion, then;
secure the upper belt (available
together with the child restraint system)
to the special attachments 2
fig. 56 located in the rear part of the
backrest.
55
A0J0093C
56
It is possible to have a mixed assembly of
traditional child restraint systems and
Universal Isofix ones. Remember that
when using a Universal Isofix child
restraint system, you can only use
approved child restraint systems with
the marking ECE R44 (R44/03 or
superior) "Universal Isofix".
The Universal Isofix "Duo Plus" child seat
is available from Lineaccessori MOPAR®.
For any further installation/usage details,
refer to the "Instruction Manual"
provided with the child restraint system.
A0J0092C
A0J0335C
79