Diskette Drive - Toshiba PSAG8C-02W013 User Manual

A300
Problem
Some CD/DVDs run
correctly, but others do
not
Cannot write correctly

Diskette drive

Problem
Drive does not operate There may be a faulty cable connection. Check
Some programs run
correctly but others do
not
You cannot access the
external 3 1/2" diskette
drive
9-8
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the CD/DVD's documentation.
Check the type of CD/DVD you are using. Refer
to Chapter 1, Introduction, for more information.
Check the region code on the DVD. It must
match that on the drive. Region codes are listed
in the Optical disc drive
Grand Tour.
If you have trouble writing, make sure you are
observing the following precautions:
Use only media recommended by TOSHIBA
Do not use the mouse or keyboard during
writing.
Use only the software supplied with the
computer for recording.
Do not run or start other software during
writing.
Do not jar the computer during writing.
Do not connect/disconnect external devices
or install/remove internal cards during writing.
If problems persist, contact your dealer.
Procedure
the connection to the computer and to the drive.
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software needs.
Try another diskette. If you can access the
diskette, the original diskette (not the drive) is
probably causing the problem.
If problems persist, contact your dealer.
section in Chapter 2,
User's Manual
The