Wireless Communication Switch; Wireless Communication Indicator - Toshiba PSAG8C-02W013 User Manual

Security
Two advanced security mechanisms ensure a high level of security:
Authentication prevents access to critical data and makes it impossible
to falsify the origin of a message.
Encryption prevents eavesdropping and maintains link privacy.

Wireless communication switch

You can enable or disable RF transmission(Wireless LAN, Bluetooth and
WiMAX) functions on and off, with this switch (Provided with some models).
No transmissions are sent or received when the switch is off. Slide the
switch toward the right of the computer to turn it on and toward the left of
the computer to turn it off.
Set the switch to off in airplanes and hospitals. Check the indicator.
It will stop glowing when the wireless communication function is off.
Turn the computer off when you enter an airplane and check the carrier's
regulations before you use a computer on board.

Wireless communication indicator

The wireless communication indicator indicates the status of the wireless
communication functions.
Indicator status
Indicator off
Indicator glows
If you used the Task Bar to disable Wireless LAN, restart the computer or
follow the procedures below to enable the system to recognize Wireless
LAN. Click Start -> Control Panel -> System and Maintenance ->
System -> Device Manager -> Network Adaptors, and right click the
wireless device then choose Enable.
It may not be possible to make a network connection to a specified network
name using the ad hoc network function.
If this occurs, the new network(*) will have to be configured for all
computers connected to the same network in order to re-enable network
connections.
* Please be sure to use new network name.
User's Manual
Indication
Wireless communication switch is set to off.
Wireless communication switch is on. Wireless
LAN, Bluetooth or WiMAX is turned on by an
application.
A300
4-33