A300
USB mouse
This section applies only with Windows Vista™ operating system.
Problem
On-screen pointer does
not respond to mouse
operation
Double-clicking does
not work
The mouse pointer
moves too fast or too
slow
The mouse pointer
moves erratically
Fingerprint sensor
Problem
Reading of the
fingerprint was not
successful
The fingerprint cannot
be read due to injuries
to the finger
Fingerprint Single-
Swipe Sign-On feature
cannot be enabled
9-10
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click speed setting in
the mouse control utility. Click Start -> Control
Panel -> Hardware and Sound -> Mouse to
access it.
Try changing the double-click speed setting in
the mouse control utility. Click Start -> Control
Panel -> Hardware and Sound -> Mouse to
access it.
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
Procedure
Please try again using the correct posture. Refer
to
Using the fingerprint sensor
Operating
Basics.
Try the recognition process again using another
enrolled finger.
Try the recognition process again using another
enrolled finger.
If fingerprints from all the enrolled fingers cannot
be read, please logon by using the keyboard to
input the password for the time being.
If problems persist, contact your dealer.
Please use TOSHIBA HW Setup to register the
User Password if it was not registered.
in Chapter 4,
User's Manual