Restarting The Computer - Toshiba PSAG8C-02W013 User Manual

Executing sleep mode
You can also enable sleep mode by pressing FN + F3. See Chapter 5,
Keyboard
You can enter sleep mode in one of three ways:
1. Click Windows Start button, point to
2. Close the display panel. This feature must be enabled. Refer to the
Power Options in the Control Panel.
3. Press the power button. This feature must be enabled. Refer to the
Power Options in the Control Panel.
When you turn the power back on, you can continue where you left when
you shut down the computer.
When the computer is shut down in sleep mode, the power indicator
glows orange.
If you are operating the computer on battery power, you can lengthen
the operating time by shutting down in hibernation mode. Sleep mode
consumes more power.
Sleep mode limitations
Sleep mode will not function under the following conditions:
Power is turned back on immediately after shutting down.
Memory circuits are exposed to static electricity or electrical noise.

Restarting the computer

Certain conditions require that you reset the computer, for example, if:
You change certain computer settings.
An error occurs and the computer does not respond to your keyboard
commands.
If you need to restart the computer, there are three ways this can be
achieved:
1. Click Start then click the arrow button (
buttons (
2. Press CTRL, ALT and DEL simultaneously (once) to display the menu
window, then click th arrow button in the lower right corner of the
screen, then select Restart.
3. Press the power button and hold it down for five seconds. Once the
computer has turned itself off, wait between ten and fifteen seconds
before turning the power on again by pressing the power button.
User's Manual
,
for details.
, and then click Sleep.
) in the power management
) and select Restart from the menu.
A300
The
3-7