Installing The Battery Pack - Toshiba PSAG8C-02W013 User Manual

A300
6. Slide the battery release latch to free the battery pack for removal, then
lift up the battery pack.
7. Pull the battery pack forward to remove it.
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery pack to your TOSHIBA dealer.

Installing the battery pack

To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1. Be sure the computer's power is off and all cables are disconnected.
2. Insert the battery pack.
3. Push the battery pack until it is firmly seated.
4. Slide the battery pack locking latch toward the lock position.
6-12
Battery Release Latch
Figure 6-2 Removing the battery pack
Battery pack
Figure 6-3 Installing the battery pack
Battery Pack
User's Manual