IBM 622138U - IntelliStation Z - Pro 6221 User Manual page 97

Code Function
020 PCI interface
030 SCSI interface
035 RAID adapter
089 Microprocessor
180 Status display
201 System memory Failed
Result Text message
Failed System board
Failed SCSI adapter in slot n failed register/counter/
power test
(where n is the slot number of the failing adapter)
Failed RAID adapter is not configured properly
Failed Any failure message
Failed Any failure message
DIMM is in location DIMM n
(where n is the number of the socket that
contains the failing DIMM)
Test setup error: Corrupt BIOS in ROM
Test setup error: Corrupt DMI BIOS, information
in BIOS is not as expected
Action
Call for service.
See the information
provided with the adapter
for instructions.
If the problem remains,
call for service.
1. Check RAID adapter
cable.
2. Replace RAID
adapter.
3. Replace SCSI hard
disk drive.
4. If the problem
remains, call for
service.
1. Verify the
microprocessor is
installed and seated
correctly.
2. If your machine does
not have the latest
level of BIOS
installed, update the
BIOS.
3. If the problem
remains, call for
service.
Call for service.
1. Reseat the failing
DIMM.
2. If the problem
remains, replace the
DIMM.
3. If the problem
remains, call for
service.
If your computer does
not have the latest level
BIOS installed, update
the BIOS to the latest
level.
If the problem remains,
call for service.
Chapter 5. Solving problems
75