Table of Contents
Advertisement
Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
To remove the bezel, complete following steps:
1. Unlock the side-cover lock.
2. Remove the side cover (see "Removing the cover" on page 16).
3. Locate the bezel-release lever; then, press the bezel-release lever toward the
4. Pull the top of the bezel away from the chassis; then, push the bezel down to
5. Remove the bezel from the computer and store the bezel in a safe place.
For instructions for replacing the bezel, see "Replacing the bezel" on page 39.
Installing an adapter
The following notes describe the types of adapters that your computer supports and
other information that you must consider when installing an adapter. See
"System-board option connectors" on page 13 for an illustration of the adapter slot
locations.
v Read the documentation that comes with your operating system.
18
IntelliStation A Pro Type 6217: Installation Guide
front of the computer.
disengage the bottom tabs.
Advertisement
Table of Contents
