Table of Contents
Advertisement
Controls, LEDs, and connectors
This section identifies the controls, LEDs, and front connectors on the IntelliStation
A Pro Type 6217 computer. See "Cabling the computer" on page 40 for an
illustration of the connectors on the rear of the computer.
Ethernet
transmit/receive
activity LED
CD or DVD drive activity LED
CD-eject button
Hard disk drive activity LED
Power-on LED
Power-control button
System-error LED
IEEE 1394A (FireWire) connectors
Mic connector (pink)
6
IntelliStation A Pro Type 6217: Installation Guide
Ethernet link status LED
When this LED is lit, it indicates that the CD or DVD drive is in use.
Press this button to insert a CD or DVD into or remove a CD or DVD from
the CD or DVD drive.
When this LED is lit, it indicates that the hard disk drive is in use.
When this LED is lit and not flashing, it indicates that the computer is
turned on. When this LED is flashing, it indicates that the computer is off
and still connected to an ac power source (standby mode).
Press this button to turn the computer on or off.
When this amber LED is lit, it indicates that a system error has occurred.
An LED on the system board is also lit to help isolate the error.
Use these connectors (four-pin on the front and six-pin on the rear) to
connect FireWire devices, such as digital video cameras and external hard
disk drives.
Use this connector to connect a microphone to your computer when you
want to record voices or other sounds on the hard disk. You can also use
this connector (and a microphone) with speech recognition software.
CD or DVD drive
activity LED
CD-eject
button
Hard disk drive
activity LED
Power-on
LED
94
13
Power-control
button
Ethernet transmit/
receive activity LED
System error LED
IEEE 1394 (FireWire) connector
Microphone connector
Line out connector
USB 5 connector
USB 4 connector
1394
Advertisement
Table of Contents
