Apm; Serial Port Configuration - Asus P8H61-M2/P8H61TPM/SI R2.0 User Manual

Serial Port Configuration

The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).
Configuration options: [Enabled] [Disabled]
Change Settings [IO=3F8h; IRQ=4]
Allows you to select the Serial Port base
IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port configuration.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT).
Configuration options: [Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the Parallel Port base
[IO=378h; IRQ=5] [IO=378h; IRQ=5,6,7,9,10,11,12] [IO=278h; IRQ=5,6,7,9,10,11,12]
[IO=3BCh; IRQ= 5,6,7,9,10,11,12] IO=3BCh; IRQ= 5,6,7,9,10,11,12] ]
Device Mode [STD Printer Mode]
Allows you to change the printer port mode. Configuration options: [STD Printer Mode]
[SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and
EPP 1.9 Mode] [ECP and EPP 1.7 Mode]
2.5.8

APM

Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
[Power Key]
Power On By PCI [Disabled]
[Disabled]
[Enabled]
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Chapter 2: BIOS information
E7361_P8H61-M2-TPM-SI R2.0_Manua19 19
IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] ] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
IO=378h; IRQ=5,6,7,9,10,11,12] [IO=278h; IRQ=5,6,7,9,10,11,12]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Disables the PCI devices to generate a wake event.
Enables the PCI devices to generate a wake event.
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
address. Configuration options: [IO=3F8h;
] [IO=2E8h; IRQ=3] IO=2E8h; IRQ=3] ]
address. Configuration options: [Auto]
] [IO=278h; IRQ=5,6,7,9,10,11,12] IO=278h; IRQ=5,6,7,9,10,11,12] ]
2-19
5/16/12 1:45:04 PM