Memory Configurations - Asus P8H61-M2/P8H61TPM/SI R2.0 User Manual

1.7.2

Memory configurations

You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM
sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps
• Always install DIMMs with the same CAS latency. For optimal compatibility, we
• Memory module with memory frequency higher than 2133 MHz and its corresponding
• Due to the memory address limitation on 32-bit Windows
• This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less..
• The default memory operation frequency is dependent on its Serial Presence Detect
• For system stability, use a more efficient memory cooling system to support a full
P8H61-M2/TPM/SI R2.0 Motherboard Qualified Vendors Lists (QVL)
DDR3-2400 (O.C.) MHz capability
Vendors Part No.
Corsair CMGTX8(XMP)
G.SKILL F3-19200CL11Q-16GBZHD(XMP1.3) 16GB(4GB x 4) DS -
G.SKILL F3-19200CL9D-4GBPIS(XMP)
GEIL GET34GB2400C9DC(XMP)
Kingmax FLLE88F-C8KKAA HAIS(XMP)
Transcend TX2400KLU-4GK(427652)(XMP)
Transcend TX2400KLU-4GK (381850)(XMP)
Transcend TX2400KLU-4GK(374243)(XMP)
PATRIOT PVV34G2400C9K(XMP)
• DDR3 1600 MHz and higher memory frequency is supported by Intel
• Due to Intel
1-14
E7361_P8H61-M2-TPM-SI R2.0_Manua14 14
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
timing or the loaded XMP Profile is not the JEDEC memory standard. The stability and
compatibility of these memory modules depend on the CPU's capabilities and other
installed devices.
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows
- Install a 64-bit Windows OS when you want to install 4GB or more on the
®
motherboard.
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency
adjustment.
memory load (4 DIMMs) or overclocking condition.
Size
8GB (2GB x 4) SS -
4GB(2 x 2GB)
2GB
2GB
4GB(2 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
processors.
2nd generation processors' behavior, DDR3 2250 MHz and higher memory
®
frequencies runs at DDR3 2200 MHz as default. In addition, DDR3 2133 MHz runs at
2000 MHz and DDR3 1866 MHz runs at 1800 MHz as default.
OS, when you install 4GB
®
SS/ Chip Chip
Timing Voltage
DS Brand NO.
- 10-12-10-27 1.65V
- 11-11-11-31 1.65V
DS - - 9-11-9-28 1.65V
DS - - 9-11-9-27 1.65V
SS - - 10-11-10-30 1.8V
SS - - - 1.65V
SS - - 9 1.65V
DS - - 9 1.65V
DS - - 9-11-9-27 1.65V
ASUS P8H61-M2/TPM/SI R2.0
OS.
®
DIMM socket support (Optional)
1 DIMM 2 DIMMs 4 DIMMs
• • •
• •
• •
• •
• • •
• • •
• • •
• •
• •
3rd generation
®
5/16/12 1:44:09 PM