Before You Proceed - Asus P8H61-M2/P8H61TPM/SI R2.0 User Manual

Uatx motherboards
Table of Contents

Advertisement

1.4

Before you proceed

Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic pad or in the
• Before you install or remove any component, ensure that the ATX power supply is
Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down
the system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
P8H61-M2/TPM/SI R2.0
P8H61-M2/TPM/SI R2.0 Onboard LED
Chapter 1: Product introduction
E7361_P8H61-M2-TPM-SI R2.0_Manua5 5
object or a metal object, such as the power supply case, to avoid damaging them due to
static electricity.
bag that came with the component.
switched off or the power cord is detached from the power supply. Failure to do so may
cause severe damage to the motherboard, peripherals, or components.
SB_PWR
ON
Standby Power
OFF
Powered Off
1-5
5/16/12 1:43:55 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P8h61-m2 tpm si r2.0P8h61-m2/tpm/si r2.0

Table of Contents