Electrolux 57" Stainless Steel Gas Grill Use & Care Manual page 15

Using the Rotisserie & Side Burner
The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisserie
burner is an infrared type which provides intense searing radiant heat. Preferred by chefs over other
cooking methods, this intense heat is magnificent for searing in the natural juices and nutrients found
in quality cuts of meats.
Once lit, the rotisserie burner will reach cooking temperatures in 1 minute. The orange/red glow will
even out in about 5 minutes. The rotisserie motor is equipped with metal gears and is capable of turn-
ing up to 20 lbs. of food. The motor is mounted on a bracket on the left side of the grill by sliding the
motor over the bracket with the cord facing the back of the grill. Make sure the motor is straight prior
to operating.
Warning: Electrical Grounding Instructions
This appliance (rotisserie motor) is equipped with a three-prong (grounding) plug for
your protection against shock hazard and should be plugged directly into a properly
grounded three-prong receptacle. Do not cut or remove the grounding prong from
this plug.
Attaching the Rotisserie
The motor is mounted on a bracket on the left side of the
grill by sliding the motor over the bracket with the cord
facing the back of the grill.
With the rotisserie motor in place and plugged into an
electrical outlet it is now ready to operate. After installing
rotis rod handle, slide one of the meat forks onto the rod.
(prongs facing away from the handle) Push the rod
through the center of the food, then slide the second meat
fork onto the rod. (prongs toward the food). Center the
food to be cooked on the rod, then push the meat forks
firmly together. Tighten the wing nuts. It may also be
necessary to wrap food with butcher's string, (never use
nylon or plastic string) to secure loose portions.
Once the food is secure, insert the pointed end of the rotis
rod into the motor assembly and rest the other end on the
support on the right-hand side of the Grill. (If needed
remove the cooking grates for more room.). Turn the
power switch to the "On" position to start the rotisserie
motor.
Note: Remove the rotisserie when not in use.
Remove warming shelf when using
rotisserie
14
14