Electrolux 57" Stainless Steel Gas Grill Use & Care Manual page 6

Side Shelf/Side Burner Assembly
5
Side Shelves Attachment
1. Loosen the bolts on the side of the grill
and attach the shelf by allowing the bolt
heads to fall through the large opening in
the bottom of the keyhole slots. Then
slide the shelves downward until the bolts
are resting against the top of the key hole
slots. Tighten all of the shelf bolts.
(See Fig. 5)
2. Attach the wires coming out from the
sides of the grill to the ignitor terminals.
(See Fig. 6)
3. Repeat for second side shelf
Note: It does not matter which wire goes
to which terminal on the four and two
wire ignitor
Installing Side Burner Plates:
1. There are 2 Black Circle Plates that need
to be installed for the Side Burner to
operate correctly.
2. Lift the Grate off of the Side Burner.
3. Place the Black Circle on top of the one
Burner. (Repeat Step for second burner.)
(See Fig. 7)
4. Replace Grate on top of the dual burners.
(See Fig. 8)
5
Fig. 5
Fig. 6
Fig. 7
Fig. 8