Initial Settings; General Settings - JVC DR MV79B - DVDr/ VCR Combo Instructions Manual

Initial Settings

Initial Settings
In this menu system, there are several ways to cus-
tomize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings.
1. Press HOME and the Home menu appears.
2. Select [Setup] > [Start] and press ENTER.
3. Use v / V to select the desired option.
4. While the desired item is selected, press B to
move to the second level.
5. Use v / V to select the second desired option.
6. Press B to move to the third level.
7. Use v / V to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.
8. Press RETURN (O) or HOME to exit the Setup
menu.
Note:
Press b to go back to the previous level.
14

General Settings

General Settings
Clock Set
You can set the clock.
1. Select the [Clock Set] option then B.
2. Enter the necessary information for year, date
and time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
3. Press ENTER to confirm your setting.
TV Aspect
[4:3 Letter Box]: Select when a standard 4:3 TV
is connected. Displays theatrical images with
masking bars above and below the picture.
[4:3 Pan Scan]: Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your
TV screen. Both sides of the picture are cut off.
[16:9 Wide]: Select when a 16:9 wide TV is con-
nected.
Power Save Mode
Set Power Save Mode to [ON] to place your
Recorder into an economic power save mode.
Factory Set
You can reset the Recorder to its original factory
settings.
1. Select the [Factory Set] option.
2. Press B to select [SET] then press ENTER.
3. Select [OK] and press ENTER.
4. Follow the Initial Setup Wizard on page 13.