Adjusting Television (Tv) Settings - Nvidia FX1300 - Quadro FX 128MB Dual DVI-I PCIe Video Card User Manual

Chapter 5
Configuring Displays

Adjusting Television (TV) Settings

If you have a television connected to your computer, follow the steps in this section
to access page where you can choose the correct regional format for TV reception,
choose the correct TV connection mode, and configure several TV display settings.
If your television is the only display connected to your computer and you do not the see the
nView Display Settings option on the NVIDIA display menu, you will see the following
options on the menu: TV Settings and Screen Adjustment
Note: If you do not see the "TV Settings" or the "Screen Adjustment" pages, go to
1 Click TV Settings to display the TV Settings page (Figure 5.4). For details, see
TV Settings, the next section.
2 Click Screen Adjustment to open the TV Output page where you can configure
TV display settings. For details, see "Device Adjustments — TV Output" on
page
If your television is the only display connected to your computer directly (or through a VCR
or switch box or receiver) and you do not see the nView Display Settings option and also do
not see the TV Settings and the Screen Adjustment option on the NVIDIA display menu,
then follow these steps.
Open the Tools page by clicking the Tools option from the NVIDIA display
1
menu. Figure 7.15 in Chapter 8 shows the Tools page.
Select the Force TV detection check box and click Apply.
2
3 You should now be able to see the TV Settings and Screen Adjustment options
on the NVIDIA display menu.
4 Click TV Settings to display the TV Settings page (Figure 5.4). For details, see
TV Settings, the next section.
5 Click Screen Adjustment to open the TV Output page where you can configure
TV display settings. For details, see "Device Adjustments — TV Output" on
page
If you have more than one display connected, including your television, follow these steps.
1 Click nView Display Settings from the NVIDIA display menu.
2 Left click on the display image that represents your TV to select it.
Then right click on that display image and select Select TV format or Device
3
Adjustments, depending on the task you want to perform.
Click Select TV format to display a list of the common TV regional settings and
4
choose a setting that applies to your region.
71
the information in the next bullet.
73.
73.
Quadro Workstation User's Guide