Chapter 7
Configuring Key ForceWare Graphics Driver Features
Modifying an Existing Application Profile
To modify pre‐defined NVIDIA‐supplied application profiles, follow these steps:
1 Set the Active profile list to Global driver settings and click the Restore button to
restore all settings to their default values.
2 Click the Active profile list and select an application profile from the list.
The driver settings of the profile you selected appear in the Global driver settings
list. Figure 7.4 shows an example for the 3D Studio Max selected profile.
Figure 7.4
A driver setting with
a check mark before it
indicates that the
setting is part of the
selected profile chosen in
the Active profile list.
3 Scroll down in the Global driver setting list to view any driver setting with a
check mark preceding it.
These checked settings are part of the selected profile. Notice that for these
checked settings, the "Global driver settings" label changes to the name of the
selected profile — in the Figure 7.4 example, the label reads "Settings for 3D
Studio Max" — indicating that these are the profile settings.
Note: You cannot change profile driver settings; i.e., those that contain a check
105
Changing An Existing Application Profile
mark. However, you can modify other non‐checked driver settings, then
Quadro Workstation User's Guide