Switching Between Nview Dualview And Span/Clone Modes - Windows 2000; Enabling Nview Multiview Mode - Only For Nvidia; Quadro Nvs-Based Graphics Cards - Nvidia FX1300 - Quadro FX 128MB Dual DVI-I PCIe Video Card User Manual

Chapter 4
Using nView Multi-Display Settings
which also enables the equivalent Disable auto‐panning on the secondary device
(viewport lock) check box.
Switching Between nView Dualview and Span/Clone
Modes — Windows 2000
Note: Under Windows 2000, switching between nView Span/Clone and Dualview
modes requires restarting your computer. (Under certain configurations,
switching between Single Display mode and Dualview/Span/Clone may also
require restarting your computer.)
1 From your Windows 2000 desktop, right click to view the Windows desktop
menu, then click Properties > Settings > Advanced and then the NVIDIA GPU tab.
2 Click nView Display Settings from the NVIDIA menu.
3 From the nView Modes list, select Clone, Horizontal Span, or Vertical Span
mode.
Note: If you just switched to Clone, Horizontal Span, Vertical Span, or, under
4 When you have returned to your desktop, go to the nView Display Settings page
and select Clone, Horizontal Span, or Vertical Span mode from the nView Modes
list.
Note: To switch back to Dualview mode, you will need to restart your computer,
Enabling nView Multiview Mode —

Quadro NVS-based Graphics Cards

Note: nView Multiview mode is a custom mode that is only available when using the
NVIDIA Quadro NVS GPU‐based series of graphics cards.
The NVIDIA Quadro NVS is a series of multi‐display graphics cards for professionals
in the financial and non‐linear editing (NLE) markets.
63
certain circumstances, Single Display mode from Dualview, you'll need to
follow the prompts to restart your computer.
as prompted.
Only
for NVIDIA
Quadro Workstation User's Guide