Quadro Fx 3000 - Installing The Nvidia Forceware Graphics Display Driver - Nvidia FX1300 - Quadro FX 128MB Dual DVI-I PCIe Video Card User Manual

Appendix A
Using Two NVIDIA GPU-Based Graphics Cards
Quadro FX 3000 — Installing the NVIDIA ForceWare
Graphics Display Driver
1 Start up your computer.
Your desktop will appear on one of the display devices attached to one of your
graphics cards. The Found New Hardware Wizard appears.
2 Click the last option labeled Install from a list or specific location (Advanced) to
select it.
3 Click Next.
4 Click the last option labeled Don't search. I will choose... to enable it and click
Next.
5 From the Common hardware types: list, double‐click the Display adapters choice.
6 On the next window that appears, make sure that none of the choices is
highlighted. If one is, click it to remove the highlight.
7 Click Have Disk.
8 Click Browse and locate the path containing NVIDIA ForceWare graphics display
driver you want to install.
9 Click the NVIDIA .inf file and then click Open.
10Click OK on the Install From Disk window.
11Then click the name of your NVIDIA GPU‐based graphics card that appears on the
Model list and click Next.
12Copying files will take a couple of minutes while you wait.
13Click all prompts to continue the process.
14Click Finish when that option appears
15If there is a prompt to restart your computer, click to do so.
16Respond to the prompts to restart your computer.
169 Quadro Workstation User's Guide