Using Connections
Editing and Deleting Connections
Printing over the network
Printing Locally
80
Editing and Deleting Connections
You can delete inactive connections or change their properties.
1
To edit a connection, click the Connection Manager Config-
ure tab, click the name of the connection to edit, and then
click the Edit button.
Or double-click a connection name in the Configure tab.
2
Depending on the type of connection you are editing, a spe-
cific edit connection dialog will appear. For detailed informa-
tion about the specific edit connection dialogs, (see "Adding a
New Connection" on page 34).
3
When you are finished editing the connection configuration,
click OK in the upper right hand corner, or complete the wiz-
ard, depending on the type of connection you are editing.
4
To delete a connection, click its name in the Configure tab,
click Delete, and then click Yes.
When using either RDP, ICA, Internet Explorer or terminal emula-
tion connections, you can print program files to network printers,
just as you would on a personal computer.
To print to a client printer (a printer directly connected to your
Neoware appliance), you must set up your printer, based upon the
type of session to use it.
Setting Up Local Printing for an RDP Session
Programs running in RDP connections can print to client printers, if
your Neoware appliance's Appliance Properties have been properly
configured. To properly configure your printer, see Chapter 5 -
Changing Appliance Properties - Step #6.