Field Upgrade Options - Thintune Linux; Hp Thinpro (128 Mb) - HP Neoware c50 - Thin Client Hardware Manual

Field Upgrade Options – Thintune Linux
FIELD UPGRADE OPTIONS: (Applicable to Thintune Linux Models Only)

HP ThinPro (128 MB)

HP ThinPro is the operating system embedded on today's HP t5545 thin client model. Because this is
the recommended replacement model for most NeoLinux transitions, it's ideal to apply its operating
system to existing Neoware assets. There are no charges or license fees associated with upgrading a
supported Neoware thin client to HP ThinPro.
FIELD UPGRADE REQUIREMENTS:
Supported Hardware Platforms: Marketing Name | Board Name
•
Neoware c50 (V4) | G170
o
Neoware e90 (V4) | G270
o
Neoware e140 (V4) | P680
o
Thintune Linux
•
128 MB Flash / 256 MB RAM
•
FIELD UPGRADE PROCESS – HP ThinPro:
1. Download HP ThinPro (128 MB)
a. Go To: http://www.hp.com/support
b. Type: t5545 (if HP ThinPro is needed) in search window
c. Click on "Download drivers and software" hyperlink
d. Click on "HP ThinPro OS" hyperlink (if HP ThinPro is needed)
e. For information about HP ThinPro (128 MB), click on hyperlinks within descriptions fields
under Operating System - Enhancements and QFEs box
f. Click "Download" button next to desired softpaq and save to disk or USB key

HP Neoware Thin Client ThinPro Image (128 MB)
Purpose: To Apply via USB Key

HP Neoware Thin Client ThinPro Image (128 MB)
Purpose: To Apply "Remotely" via Thintune Manager
2. Apply softpaq via USB Key or Thintune Manager (instructions in softpaq)
NOTE:
Once your thin client has been upgraded to HP ThinPro, it can no longer
be seen or managed by Thintune Manager. HP ThinPro can be remotely
managed only by HP Device Manager and/or Altiris.
Flash (blank) upgrades for Neoware (V4) models are available under HP part number FQ750AA
*
*
Thintune
64