[Av Out Setup] Screen - Panasonic AG-AC130A Operating Instructions Manual

[AV OUT SETUP] screen

Item
[HDMI OUT <CAMERA>
SEL] <PB>
(AVCHD
mode only)
[DOWNCON <CAMERA>
MODE] <PB>
(AVCHD
mode only)
[HP MODE] <CAMERA> Selects the sound heard from the headphones.
[TEST TONE] <CAMERA> Sets test tone output to channels 1 and 2 when BARS setting is ON.
[VIDEO <CAMERA>
SETUP] <PB>
[AUDIO OUT] <CAMERA>
<PB>
88
Display
mode
Sets the video format of the <HDMI> output.
[1080i/720P]:
[DOWN CONV]:
Switches down-conversion output mode.
[SIDE CROP]:
[LETTER BOX]:
[SQUEEZE]:
[LIVE]:
[RECORDING]:
[LEVEL1]:
[LEVEL2]:
[OFF]:
Sets the setup level of video signals.
[0%]:
[7.5%A]:
Sets the audio signals to output from the <AUDIO OUT> terminal (A/V OUT).
[CH1/CH2]:
[CH1]:
[CH2]:
• When a memory card containing 5.1 channel content recorded on another
equipment is played back on the camera, it is down-mixed to 2 channels when
output through the <AUDIO OUT> and headphone terminals.
Description of settings
Outputs at the resolution set in [REC FORMAT].
<HDMI> is output at 480P.
Crops the left and right edges. Images output from the
external output terminals <VIDEO OUT>, <HDMI> will have
portions which extend beyond the edges of the screen and
cannot be seen.
Adds black bands at the top and bottom of the image.
Squeezes images horizontally.
The sound input from the microphone is output as is. This
setting is selected when delays in the sound are annoying.
The sound in the status to be recorded (the sound
synchronized with the images) is output.
Outputs the 1 kHz test tone.
Test tone is output at lower volume than LEVEL1.
Does not output the test tone.
<VIDEO OUT> terminal output and recording setup levels
will both be set to 0%.
<VIDEO OUT> terminal output setup level will be set to
7.5%, while recording setup level will be set to 0%.
CH1 terminal = CH1 signals, CH2 terminal = CH2 signals
CH1 terminal = CH1 signals, CH2 terminal = CH1 signals
CH1 terminal = CH2 signals, CH2 terminal = CH2 signals
is the factory default mode.