Setup Menu List; [Scene File] Screen - Panasonic AG-AC130A Operating Instructions Manual

Menu

Setup menu list

[SCENE FILE] screen

Display
Item
<CAMERA> [LOAD]: Loads the scene file settings saved in this camera.
[LOAD/SAVE/
INIT]
[SYNC SCAN <CAMERA> Selects the synchro scan display setting.
TYPE]
[SYNCHRO <CAMERA> Adjusts the synchro scan shutter speed used for shooting images on a TV
SCAN]
[DETAIL <CAMERA> Adjusts the level of the image outline correction (in the horizontal and vertical
LEVEL]
[V DETAIL <CAMERA> Adjusts the level of outline correction in the vertical direction.
LEVEL]
[DETAIL <CAMERA> Adjusts the level of noise reduction of the detail signal.
CORING]
mode
[SAVE]: Saves the updated scene file settings.
[INIT]: Returns the scene file settings selected using the <SCENE FILE>
dial, to the factory settings.
[NO]: Returns to the previous screen.
[deg.]: Sets to angle display.
[sec]: Sets to speed display.
screen, etc.
Holding the OPERATION lever tilted upward or downward will cause the values
to change at a faster rate.
• When [SYNC SCAN TYPE] = [sec]
60i/60 P mode: [1/60.0] - [1/249.8] secs
30 P mode: [1/30.0] - [1/48.0] - [1/249.8] secs
24 P mode: [1/24.0] - [1/48.0] - [1/249.8] secs
• When [SYNC SCAN TYPE] = [deg.]
[3.0 d] - [180.0 d] - [360.0 d] (0.5 d increments, angle display)
directions).
[-7] ... [0] ... [+7]
[-7] ... [0] ... [+7]
Set to – for a clearer image, but noise increases slightly.
Set to + to reduce noise.
[-7] ... [0] ... [+7]
Description of settings
is the factory default mode for the <SCENE FILE> dial <F1>.
79