Table of Contents
Advertisement
Altos G540 Installation Configuration Guide
Manager
Intel PROSet Utility
Configuring SAS Daughter Board
Please refer to the Appendix B. for the SAS daughter board integrated mirror
configuration.
Installation Tips
Though Windows Server 2008 x64 can recognize the SAS daughter board,
1.
we still replace the driver with the one in EasyBUILD. Please copy SAS
daughter board driver from the EasyBUILD 8.0 build 200 to a floppy or
USB flash first before the installation.
Please boot the system form the Windows Server 2008 x64 DVD. Follow
2.
the instructions to do the installation.
When you see the "Where do you want to install Windows?" on the
3.
screen, please insert the floppy diskette or USB flash with SAS daughter
board driver and click on Load Driver.
Click on Browser and select directory of the floppy or USB flash that
4.
contains the driver.
Click on OK. You will see the supported devices listed.
5.
Select "LSI Adapter, SAS 3000 series, 8-port with 1068 -StorPort
6.
(A:\lsi_sas.inf)" and click on Next.
After the driver is loaded and returned to "Where do you want to install
7.
Windows?" page, click on Drive options (advanced) to create a partition
for installation.
After the partition created, click on Next to continue the installation and
8.
follow the instructions to finish the installation.
Chipset Driver Package Installation
Please refer to the Windows Server 2008 Enterprise x64 Edition (with LSI
MegaRAID SAS 8300XLP) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
Please refer to the Windows Server 2008 Enterprise x64 Edition (with LSI
MegaRAID SAS 8300XLP) Gigabit Ethernet Driver Installation section.
IOAT Driver Installation
The IOAT driver will be installed automatically when you installing the onboard
Gigabit Ethernet driver.
VGA Driver Installation
Please refer to the Windows Server 2008 Enterprise x64 Edition (with LSI
10
13.0.44.0
EasyBUILD 8.0 build 200 (or later)
- Quick Links:
- Board Layout
Hide quick links:
Advertisement
Table of Contents
