Raid Utility Installation; Network Utility Installation; Windows Server 2008 Enterprise X64 Edition Installation (With Sas Daughter Board); Bios Required - Acer Altos G540 Installation & Configuration Manual

After installing the driver, you would see ATI ES1000 listed in Display
4.
adapters.

RAID Utility Installation

For installing MegaRAID Storage Manager for LSI MegaRAID SAS 8300XLP,
1.
please insert the EasyBUILD 8.0 build 200 into the optical drive.
Expand Utilities -> Altos G540 -> LSI MegaRAID SAS 8300XLP, select
2.
MegaRAID Storage Manager(Windows Server 2008 x64) and click on
Setup.
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At the Setup Type, please select Custom Installation and StandAlone.
4.
Follow the instruction again to complete the installation.
5.

Network Utility Installation

The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise x64 Edition Installation (with
SAS Daughter Board)
Below information describes how to manually install Windows Server 2008
Enterprise x64 Edition on Altos G540 with SAS daughter board.

BIOS Required

Altos G540 BIOS (or later) is required to support Windows Server 2008.
P17

Drivers Required

For Windows Server 2008 x64 Installation, the following device drivers are
required.
Device
SAS daughter board
Chipset
Onboard Gigabit
Ethernet
Onboard VGA
IOAT

Software Required

For Windows Server 2008 x64 Installation, the following manage utilities are
required.
Software
MegaRAID Storage
9
Version
1.27.03.00 EasyBUILD 8.0 build 200 (or later)
8.6.0.1002 EasyBUILD 8.0 build 200 (or later)
9.12.17.0 EasyBUILD 8.0 build 200 (or later)
8.240.50.3000 EasyBUILD 8.0 build 200 (or later)
1.2.79.9 EasyBUILD 8.0 build 200 (or later)
Version
2.63-00 EasyBUILD 8.0 build 200 (or later)
Altos G540 Installation Configuration Guide
EasyBUILD Version
EasyBUILD Version