Table of Contents
Advertisement
Note: You have to install at least one SATA HDD to the onboard
SATA controller in the system or you cannot see the MediaShield
ROM BIOS 6.77 during POST.
Creating a RAID1 Volume
1
After you entering the configuration utility, Use the Up and Down
arrow key to change the RAID Mode to Mirroring.
2
Use the Left and Right arrow key to move the HDD from Free
Disks to Array Disks.
3
Press F7 to finish the RAID creation.
4
Press Y to clear the data on disks.
5
Now you will see the RAID volume listed on screen. You can press
Ctrl-X to exit and start to install OS
Configuring LSI MegaRAID SAS 8708ELP
This section briefly shows how to create RAID with LSI MegaRAID SAS
8708ELP.
Starting LSI MegaRAID SAS RAID Configuration Utility
To start LSI MegaRAID SAS RAID Configuration Utility for MegaRAID
SAS 8708ELP, press CTRL-H when you see the RAID BIOS during POST.
After POST finished, the Adapter Selection page will show on the
screen. Please click on Start to launch the configuration menu.
Loading Factory Default Setting
1
In the Configuration menu, select Adapter Properties. The
current adapter settings appear. Please click on Next to change
the setting.
2
Change the setting of Set Factory Defaults from No to Yes then
click on submit.
3
Press Ctrl+Alt+Del to reboot the server.
111
Advertisement
Table of Contents
Troubleshooting
