Table of Contents
Advertisement
7.
Remove the two screws as shown then detach the left and right antenna boards from the upper case.
Removing the Touch Pad
1.
See "Removing the Battery Pack" on page 51
2.
See "Removing the Middle Cover" on page 57
3.
See "Removing the Keyboard" on page 58
4.
See "Removing the LCD Module" on page 59
5.
See "Removing the LAN Board" on page 64
6.
See "Removing the Upper Case" on page 65
7.
Detach the touch pad frame from the upper case carefully then disconnect the touch pad cable from the
touch pad board.
72
Chapter 3
Advertisement
Table of Contents
