Table of Contents
Advertisement
Move the highlight bar from one item to another. Press Space to enable or disable the item. Press Enter to
view the available options of each selected item. Press Esc to close the submenu.
The right corner screen information gives you the available function keys and the specified test number.
Space: Enables/disables the item
!
ESC: Exits the program
!
F1: Help
!
F2: Tests the selected item(s)
!
Enter: Opens the available options
!
Test Times: Indicates the number of tests to perform.
!
NOTE: The F1 and F2 keys function only after you finish configuring the Test option.
NOTE: When any errors are detected by diagnostic program, refer to "Index of PQA Diagnostic Error Code,
Message" on page 87 for troubleshooting.
Chapter 2
PQA
Diag
Result
SysInfo
Diag
Test Items
MANUAL TEST
[ ] System Board
AUTO
TEST
[ ] Memory
[ ] Keyboard
[ ] Video
[ ] Parallel Port
[ ] Serial Port
[ ] Diskette Drive
SPACE: mark/unmark selecting item
[ ] Hard Disk
ESC
[ ] CD-ROM
[ ] Coprocessor
F2
[ ] Pointing Dev.
ENTER: open sub-item's menu
[ ] Cache
Test Times = 1
Vx_x
xx-xx-xx
Option
Exit
: return to upper menu
: test the marked item(s)
45
Advertisement
Table of Contents
