Error Message List
Error Messages
Previous boot incomplete - Default
configuration used
Memory size found by POST differed from
CMOS
Diskette drive A error
Incorrect Drive A type - run SETUP
System cache error - Cache disable
CPU ID:
DMA Test Failed
Software NMI Failed
Fail-Safe Timer NMI Failed
Device Address Conflict
Allocation Error for device
Failing Bits: nnn
Fixed Disk n
Invalid System Configuration Data
I/O device IRQ conflict
Operating system not found
80
FRU/Action in Sequence
Run "Load Default Settings" in BIOS Setup Utility.
RTC battery
Main Board
Run "Load Default Settings" in BIOS Setup Utility.
DIMM
Main Board
Check the drive is defined with the proper diskette type in BIOS
Setup Utility
See "External Diskette Drive Check" on page 76.
Check the drive is defined with the proper diskette type in BIOS
Setup Utility
See "External Diskette Drive Check" on page 76.
Main Board
Main Board
DIMM
Main Board
DIMM
Main Board
DIMM
Main Board
Run "Load Default Settings" in BIOS Setup Utility.
RTC battery
Main Board
Run "Load Default Settings" in BIOS Setup Utility.
RTC battery
Main Board
DIMM
BIOS ROM
Main Board
None
BIOS ROM
Main Board
Run "Load Default Settings" in BIOS Setup Utility.
RTC battery
Main Board
Enter Setup and see if fixed disk and drive A: are properly
identified.
Diskette drive
Hard disk drive
Main Board