Using Picture By Picture (Pbp) Function - NEC EA294WMi-BK User Manual

Using Picture by Picture (PBP) Function

This monitor can display split screens from two sources by using any one of the input combinations shown on page 15.
NOTE: Please see PBP MODE (page 15) and PBP TYPE (page 15).
The following settings are set to be the same for both screens:
BRIGHTNESS, AUTO BRIGHTNESS, OFF MODE SETTING, HUMAN SENSING, VIDEO LEVEL, OVER SCAN,
PROGRAMMABLE, VOLUME, SOUND INPUT, VIDEO DETECT, PBP MODE, PBP TYPE, RESPONSE IMPROVE,
OFF TIMER, POWER SAVE TIMER, LED BRIGHTNESS, DDC/CI, USB POWER, LANGUAGE, OSD TURN OFF,
OSD LOCK OUT, HOT KEY, SIGNAL INFORMATION, SENSOR INFORMATION, KEY GUIDE, CARBON CONVERT
SETTING, CURRENCY SETTING, CURRENCY CONVERT SETTING
SETUP
1. Press MENU to show OSD menu.
2. Select PBP MODE, then select LEFT or RIGHT as the adjustable screen. Exit OSD in order to change signal input.
3. Press INPUT, then select the input signal used by the selected screen.
4. Return to 1 to select the input for the other screen.
English-23