Table of Contents
Advertisement
Color
Color Control System: Color presets select the desired color setting.
1, 2, 3, 5: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will
appear on screen and the direction (increase or decrease) will be shown by the bars.
NATIVE: Original color presented by the LCD panel that is unadjustable.
sRGB: sRGB mode dramatically improves the color fi delity in the desktop environment by a single standard RGB color
space. With this color-supported environment, the user could easily and confi dently communicate color without further
color management overhead in most common situations.
DICOM SIM.: The white point color temperature and the gamma curve are set to a DICOM simulation.
PROGRAMMABLE: The brightness of grayscale can be changed to your preference by downloading the application
software.
NOTE: When MOVIE, GAMING, or PHOTO is selected as the DV MODE, NATIVE is selected automatically as the
seven color preset and cannot be changed.
Tools
VOLUME
Controls the volume of the speakers or headphones.
To mute the speaker output, touch the "PBP/RESET" key.
SOUND INPUT
This function selects AUDIO INPUT, HDMI or DISPLAYPORT.
NOTE: When using split screen, the SOUND INPUT setting can change which audio input signal is routed through the
built-in speakers.
LEFT: Outputs the audio that is associated with the left video signal (HDMI or DisplayPort only).
RIGHT: Outputs the audio that is associated with the right video signal (HDMI or DisplayPort only).
AUDIO INPUT: Outputs the audio from the input audio jack on the back of the monitor (left side of display below the
USB ports).
VIDEO DETECT
Selects the method of video detection when more than one video inputs are connected.
FIRST: When current video input signal is not present, then the monitor searches for a video signal from the other
video input port. If the video signal is present in the other port, then the monitor switches the video source input port
to the new found video source automatically. The monitor will not look for other video signals while the current video
source is present.
NONE: The monitor will not search the other video input port unless it is turned on.
PBP MODE
Activates PICTURE BY PICTURE (split screen) function and selects the priority (adjustable) screen.
OFF: PBP is OFF. Shows a single screen.
LEFT: PBP is ON. Shows 2 screens. The left screen is select as priority screen which is adjustable.
RIGHT: PBP is ON. Shows 2 screens. The right screen is select as priority screen which is adjustable.
NOTE: When selected "LEFT" or "RIGHT", each screen is available to be adjusted. (see page 24)
PBP TYPE
Selects the size of the sub-picture used in PICTURE BY PICTURE (split screen) mode.
AUTO: Shows 2 screens based on INPUT RESOLUTION and EXPANSION setting of the priority (adjustable) screen
selected in PBP MODE. The available signals used for PBP mode are limited to the following combinations only.
CENTER: Splits 2 screens divided evenly from the center.
D-SUB1
3
DVI1*
Left
D-SUB2
Picture
4
DVI2*
Source
HDMI
DP
*1 When PBP TYPE is selected to AUTO, the "left picture" is displayed on the left half of the display only.
*2 When PBP TYPE is selected to AUTO, the "right picture" is displayed on the right half of the display only.
*3 DualLink
*4 SingleLink
D-SUB1
DVI1*
3
Yes*
1
Yes*
1
1
1
Yes*
Yes*
No
No
No
No
No
No
No
No
English-15
Right picture Source
D-SUB2
DVI2*
4
Yes
Yes
Yes
Yes
2
2
Yes*
Yes*
2
2
Yes*
Yes*
Yes*
2
Yes*
2
Yes*
2
Yes*
2
HDMI
DP
Yes
Yes
Yes
Yes
2
2
Yes*
Yes*
2
2
Yes*
Yes*
Yes*
2
Yes*
2
Yes*
2
Yes*
2
Hide quick links:
Advertisement
Table of Contents
