NEC EA222WME-BK User Manual

22" led-backlit eco-friendly widescreen desktop monitor
Hide thumbs Also See for EA222WME-BK:


MultiSync EA222WMe
User's Manual


Table of Contents

Summary of Contents for NEC EA222WME-BK

  • Page 1 MultiSync EA222WMe User’s Manual...
  • Page 2: Table Of Contents

    Index Warning, Caution ... English-1 Registration Information ... English-1 Recommended use ... English-3 Contents ... English-5 Quick Start ... English-6 Controls ... English-11 Specifications ...English-15 Features ... English-16 Troubleshooting ... English-17 Using the Auto Brightness function ... English-18 TCO Displays 5.0 ... English-19 Manufacturer’s Recycling and Energy Information ...
  • Page 3: Warning, Caution

    – EN 61000-3-2 – EN 61000-3-3 – EN 55024 WARNING CAUTION European U.K. Continental EU (except U.K.) U.K. Declaration of the Manufacturer and marked with NEC Display Solutions, Ltd. English-1 Chinese Japanese China Japan 100* 4-13-23, Shibaura, Minato-Ku Tokyo 108-0023, Japan...
  • Page 4: Canadian Department Of Communications Compliance Statement

    NaViSet is a trademark of NEC Display Solutions Europe GmbH in the countries of EU and Switzerland. MultiSync is a registered trademark of NEC Display Solutions, Ltd. in the countries of U.K., Italy, Austria, Netherlands, Switzerland, Sweden, Spain, Denmark, Germany, Norway and Finland.
  • Page 5: Recommended Use

    NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
  • Page 6 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.
  • Page 7: Contents

    Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Cable cover • Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male) •...
  • Page 8: Quick Start

    Quick Start To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1).
  • Page 9 5. To keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the Power cord and DVI cables into the specific hooks, as indicated in Figure C.2/Figure C.3. Place the D-Sub and the USB cables into the specific hooks, as indicated in Figure C.2/Figure C.3. 6.
  • Page 10: Raise And Lower Monitor Screen

    8. Connect the power cord to the power outlet (Figure E.1). NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. 9. The Vacation Switch on the back side of the monitor, near the AC inlet, must be turned on. Turn on the monitor with the front power button and then the computer (Figure E.1).
  • Page 11: Screen Rotation

    Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with your fingers. To raise the screen, with one hand, grip the top of the display by the handle using the other hand to grip the bottom. Lift up to the highest position (Figure RL.1).
  • Page 12: Flexible Arm Installation

    8. Reverse this process to re-attach stand. NOTE: Use only VESA-compatible alternative mounting method. Handle with care when removing stand. NOTE: Match “TOP SIDE” mark on stand to top side of the monitor head when re-attaching stand. Flexible Arm Installation This LCD monitor is designed for use with a flexible arm.
  • Page 13: Controls

    Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: To access OSD menu, press any of the control buttons (MENU, Left, Right, Down, Up). To change signal input, press the SELECT button. To change ECO MODE, press the RESET/ECO MODE button. NOTE: OSD must be closed in order to change signal input.
  • Page 14: Auto Brightness

    AUTO BRIGHTNESS OFF: No function. (AUTO BRIGHTNESS) 1: Adjusts the brightness automatically, by detecting the brightness level of your environment and adjusting the monitor with the best brightness setting* (AUTO BRIGHTNESS) 2: Adjusts the brightness automatically for the best brightness setting based on the white display area.
  • Page 15: Menu Tools

    EXPANSION MODE: Selects the zoom mode. FULL: The image is expanded to 1680 x 1050, regardless of the resolution. ASPECT: The image is expanded without changing the aspect ratio. OFF TIMER: Monitor will automatically power-down when the end user has selected a predetermined amount of time. Before powering off, a message will appear on the screen asking the user if they want to delay the turn off time by 60 minutes.
  • Page 16 Information The Information menu indicates the current input, display resolution, horizontal and vertical frequency, and polarity settings of the monitor. The model and serial numbers of your monitor are also indicated. OSD Warning OSD Warning menus disappear with Exit button. NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync.
  • Page 17: Specifications

    1440 x 900* at 60 Hz to 75 Hz 1400 x 1050* at 60 Hz to 75 Hz 1680 x 1050 at 60 Hz... NEC DISPLAY SOLUTIONS cites recommended. 473.8 mm/18.7 inches 296.1 mm/11.7 inches 296.1 mm/11.7 inches 473.8 mm/18.7 inches USB Specification Revision 2.0...
  • Page 18: Features

    Carbon conversion factor - conversion factor is based on OECD publication of global CO2 emissions 2008 Edition). This monitor has a manufacturing carbon footprint of approximately 27.2 kg. Note: The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for its monitors.
  • Page 19: Troubleshooting

    NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
  • Page 20: Using The Auto Brightness Function

    Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly.
  • Page 21: Tco Displays 5.0

    TCO Displays 5.0 This display is designed for both you and the planet! TCO Certified is a third party verified program, where every product model is tested by an accredited impartial test laboratory. TCO Certified represents one of the toughest certifications for displays worldwide.
  • Page 22: Manufacturer's Recycling And Energy Information

    Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).

This manual is also suitable for:

Multisync ea231wmiMultisync ea222wme

Table of Contents