Performance Features - Kenmore 26823 - Progressive Bagless Canister Vacuum Use And Care Manual

Suggested Sweeping Pattern
For best cleaning action, the PowerMate ®
Nozzle should be pushed straight away from
you and pulled straight back. This pattern
should be continued across the rug with stow,
gliding motions. NOTE: Fast, jerky strokes do
not provide complete cleaning.
Carpeted stairs need to be vacuumed regularly.
For best cleaning results, keep all airflow
passages open and free of clogs.
Check occasionally for clogs.
See HOW YOUR VACUUMWORKS section.
Unplug the vacuum cleaner from the
electrical outlet before checking for clogs.
Suction Control and Performance
Indicator (inteliCLEAN Automatic Booster
Sensor with LED Display)
/
'7
Located on the handle are 4 buttons which
have the following uses:
OFF - Turns OFF the vacuum cleaner
when you are finished cleaning.
CARPET ON/OFF -Turns the PowerMate '_
Nozzle ON and OFF. This is indicated on
the performance indicator when the
CARPET light is illuminated.
POWER CONTROL H-M-L -
Turns on the vacuum
cleaner and cycles the suction
level through high to medium
to low. This is shown
on the performance
indicator by a flashing bar
and the words
HIGH, MID, LOW,
inteliCLEAN
ON/OFF -
This activates the
vacuum cleaner's
dirt sensor. When
dirt is detected,
the vacuum increases
the suction level automatically. When the
dirt has been removed, the suction level
decreases to LOW.
UoSiwngr thet e ° Nozzle
1.When using the PowerMat e®
Nozzle, release the nozzle
from its fixed position by
pressing the left pedal
located on the top of the
nozzle.
2. To adjust the carpet height
setting, press the right
pedal. There are 4
adjustments levels: XLOW,
LOW, MID, HIGH.
3. The headlight and agitator start
automatically when the vacuum cleaner
is turned on. To stop the agitator when
vacuuming bare floors, press the
CARPET ON/OFF button on the hose
handle.
4. If an object stops the agitator and the
PowerMate ® Nozzle shuts off, turn off
the vacuum cleaner, unplug it from the
outlet, clear the obstruction or clog, and
press the red reset button. Plug in the
vacuum cleaner, press the ON button
and continue vacuuming.
5. To remove the PowerMate ® Nozzle from
the telescopic wand, shut off the
vacuum cleaner, step on the release
pedal on the neck of the PowerMate ®
Nozzle, and pull the telescopic wand out
of the neck of the PowerMate ® Nozzle.