Figure 6-1
6-4
Installing and Configuring Mass Storage Devices
Hardware Installation for Drives
Module Orientations
The Model 748i uses two mass storage modules, each with a capacity of four
drives. The standard module holds up to four single-ended SCSI devices,
and the optional module hold up to two fast-wide-differential SCSI devices
and up to two single-ended SCSI devices.
Removable media drives can be fitted to be accessible from either the front
or the rear of the Model 748 chassis. See Figure 6-1 and Figure 6-2 for some
typical locations.
The mass storage module itself can only be removed from the rear (I/O side)
of the chassis. If your system is rack-mounted, front side out, try to space the
rack with enough room to remove the module from the rear.
Standard Mass Storage Module: Typical Device Positions