Motorola RDV2020 - RDX VHF - Radio User Manual page 91

Programmable Via
RADIO PANEL
Features
Display
Nuisance Ch
Yes
Delete (4)
PL Defeat Yes
Power Select
No
(4)
Programmable via
CPS
Non- Non-
Display
Display Display
Yes Yes Yes
Yes Yes Yes
No Yes Yes
Default Value
Press SB2 to start scanning and wait until the radio
lands on the channel you want to delete. Long press
SB2 to delete the channel.
SB2 Button
Note: The nuisance deleted channel will be restored
into the scan list when the radio is turned OFF or
you exit SCAN.
Also known as 'Squelch defeat'. Short Press SB1 to
enable PL/DPL defeat so you can listen or monitor
SB1 Button
any activity in the channel without noise. Press SB1
again to disable PL/DPL defeat.
Use CPS for selecting the transmission power level
you want for each channel. Power level default
High Power
depends on maximum power the radio supports.
(Model
dependant)
Note: There may be power restrictions depending
on the frequency chosen in each channel.
Programming Tips
89