Paired Locations In A C7000 Enclosure With A Half-Height Partner Server Blade - HP EH920A - StorageWorks Ultrium 1760 Tape Drive User Manual

CAUTION:
To prevent improper cooling and thermal damage, do not operate the server blade or the enclosure
unless all device bays are populated with either a component or a blank.
1. Identify the partner server blade to be installed with the HP StorageWorks Tape Blade. The two
blades always occupy a pair of device bays.
• c7000 enclosures: Slot combinations are: 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10, 11 &
12, 13 & 14, 15 & 16.
Partner server blade in
bay:
HP Tape Blade in bay:
Figure 4 Paired locations in a c7000 enclosure with a half-height partner server
blade
• c3000 enclosures: Slot combinations are: 1 & 2, 3 & 4, 5 & 6, 7 & 8.
Partner server blade in bay:
HP Tape Blade in bay:
odd-numbered bay
even-numbered bay to the right
1 2 3
2 1
4
even-numbered bay
odd-numbered bay to the left
4 5 6 7
3 6 5
8
Tape Blade
8
7
21